621K Wheel Tractor-Scraper

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

Be More Productive

WORK IN COMFORT

DESIGNED FOR SAFETY

EASY TO OPERATE

INTERGRATED CAT TECHNOLOGIES

EXECUTE EFFICIENCY

المعدات القياسية

NOTE
  • Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN – TRACTOR
  • Cat C13
  • Cat engine brake
  • Electric start, 24 Volt
  • Air cleaner, dry type with precleaner
  • Fan, hydraulic
  • Ground level engine shutdown
  • Radiator, aluminum unit core, 9 fins per inch
  • Guard, crankcase
  • Muffler (only for less or non-regulated regions engine arrangement only)
  • Starting aid, ether
  • Braking system:
    – Primary and secondary, wet disc, hydraulic
    – Parking, hydraulic-released, spring-applied
    – Throttle lock
  • Transmission:
    – 8-speed planetary power shift
    – ECPC control
    – APECS software
    – Programmable top gear selection
    – Transmission hold
    – Differential lock
    – Guard, power train
    – Standard tire spin reduction
    – Ground speed control
    – Machine speed limit
    – Differential lock protection
POWER TRAIN – SCRAPER
  • Braking system:
    – Primary and secondary, wet disc, hydraulic
ELECTRICAL – TRACTOR
  • Alternator, 150 Amp
  • Batteries (4), 12V, 1,000 CCA, maintenance free, high output
  • Electrical system, 24V
  • Lighting system:
    – Headlights, halogen
    – Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
  • Starting/charging receptacle
ELECTRICAL – SCRAPER
  • Alarm, backup
  • Lighting system:
    – Brake lights, LED
    – Turn signals with hazard function, LED
OPERATOR ENVIRONMENT – TRACTOR
  • HVAC system, heat, AC, defrost
  • Thermostat control of HVAC system
  • Coat hook
  • Lunchbox platform with holding strap
  • Diagnostic connection (2)
  • 12V power ports (2)
  • Differential lock (1)
  • Dome courtesy light
  • Horn, electric
  • T-Handle implement control
  • Mirror, rearview
  • Radio ready
  • ROPS/FOPS cab, pressurized
  • Keypad switches:
    – Throttle lock
    – Wipers/washers
    – Hazard lights
    – Retarding level select
    – Work lights on, off
    – Information mode on Messenger Display
  • Safety tab rocker switches
  • Seat belt, static two-piece
  • Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
  • Steering wheel, tilt, telescoping, padded
  • Windows, right side emergency egress
  • Windows, sliding
  • Windows, laminated, zipped in
  • Windshield wipers, front and rear windows, includes washers
  • Door lock
  • Messenger Display
  • Gauges, warnings include:
    – Coolant temperature
    – Engine oil temperature
    – Hydraulic oil temperature
    – Fuel level
    – Park brake
    – Implement lockout
    – Brake system
    – Regeneration required
    – Throttle lock
    – System voltage
    – Secondary steering
    – Bail down
    – Ejector auto
    – Differential lock
    – Apron float
    – Transmission hold
    – Cushion hitch
    – High beam lights
    – Action lamp
    – Engine speed, rpm
    – Gear selection
FLUIDS
  • Extended Life Coolant to –37° C (–34° F)
OTHER STANDARD EQUIPMENT – TRACTOR
  • Advanced cushion hitch
  • Accumulators (cushion hitch) with Canadian Registration Number (CRN)
  • Fast oil change
  • Fenders, non-metallic
  • Heater, engine coolant 120V
  • Rims (2)
  • Tow pin, front
  • Vandalism locks
  • Heater, engine coolant 120V
OTHER STANDARD EQUIPMENT – SCRAPER
  • Bowl
    – 18.4 m³ (24 yd³), heaped
    – 14.1 m³ (18.4 yd³), struck
  • Vandalism locks
  • Hydraulic position sensing cylinders (bowl lift and apron)

معلومات إضافية

General - Maximum Depth of Spread

540.0 mm ( 21.3 in )

General - Scraper Capacity - Heaped

18.4 m³ ( 24.0 yd³ )

General - Overall Width

3.57 m ( 11.71 ft )

General - Maximum Depth of Cut

315.0 mm ( 12.4 in )

General - Scraper Capacity - Struck

13.0 m³ ( 17.1 yd³ )

General - Tires - Scraper

33.25R29**E3

General - Width - Cut

3.14 m ( 10.3 ft )

General - Fuel Tank Refill Capacity - Scraper

763.0 l ( 201.0 gal (US) )

General - Top Speed - Loaded

53.9 km/h ( 33.5 mile/h )

General - 180° Curb-to-Curb Turning Width

11.8 m ( 38.71 ft )

General - Overall Shipping Height

4.03 m ( 13.22 ft )

General - Tires - Tractor Drive

33.25R29**E3

General - Rated Load

26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)

Engine Model - Tractor

Cat C13

Rated Engine RPM - Tractor

2000.0 r/min ( 2000.0 r/min )

Engine - Flywheel Power - Tractor

304.0 kW ( 407.0 hp )

Engine - Note

C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.

Tractor Engine - Flywheel Power - Tractor/Scraper

304 kW (407 hp)

Scraper Bowl - Scraper Capacity - Heaped

18.4 m³ ( 24.0 yd³ )

Transmission - Top Speed - Loaded

53.9 km/h ( 33.5 mile/h )

Service Refill Capacities - Transmission System

93.0 l ( 24.76 gal (US) )

Service Refill Capacities - Hydraulic System

83.0 l ( 21.926 gal (US) )

Service Refill Capacities - Crankcase

30.58 l ( 8.08 gal (US) )

Service Refill Capacities - Cooling System

45.0 l ( 11.89 gal (US) )

Service Refill Capacities - Fuel Tank

818.0 l ( 216.09 gal (US) )

Dimensions - Width - Overall Machine

3585.0 mm ( 141.1 in )

Dimensions - Width - Tractor

3381.0 mm ( 133.1 in )

Dimensions - Width - Inside of Bowl

3048.0 mm ( 120.0 in )

Dimensions - Width - Outside Rear Tires

3275.0 mm ( 128.9 in )

Dimensions - Height - Overall Shipping

4029.0 mm ( 158.6 in )

Dimensions - Height - Top of Cab

3612.0 mm ( 142.2 in )

Dimensions - Ground Clearance - Tractor

557.0 mm ( 21.9 in )

Dimensions - Front of Tractor to Front Axle

3119.0 mm ( 122.8 in )

Dimensions - Axle to Vertical Hitch Pin

540.0 mm ( 21.3 in )

Dimensions - Height - Scraper Blade Maximum

520.0 mm ( 20.5 in )

Dimensions - Wheel Base

7998.0 mm ( 314.9 in )

Dimensions - Rear Axle - Rear of Machine

2898.0 mm ( 114.1 in )

Dimensions - Width - Rear Tire Centers

2290.0 mm ( 90.2 in )

Dimensions - Length - Maximum (Push-Pull)

15576.0 mm ( 613.2 in )

Dimensions - Length - Overall Machine - Standard

14015.0 mm ( 551.8 in )

Dimensions - Width - Overall Machine - Ladder Down

3790.0 mm ( 149.2 in )

Non Push-Pull - Operating Weight - Empty

36185.0 kg ( 79787.0 lb )

Non Push-Pull - Overall Length

14.02 m ( 45.9 ft )

Push-Pull - Overall Length - With Bail Down

15.58 m ( 51.1 ft )

Push-Pull - Operating Weight - Empty

36567.0 kg ( 80630.0 lb )

Cab - Exterior Sound Level

The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A).

Cab - ROPS/FOPS

Meets ISO standards

Safety Criteria Compliance Standards - Falling Object Protective Structure (FOPS)

ISO 3449:2005 Level II

Safety Criteria Compliance Standards - Reverse Alarm

ISO 9533:2010

Safety Criteria Compliance Standards - Steering System

ISO 5010:2007

Safety Criteria Compliance Standards - Rollover Protection Structure (ROPS)

ISO 3471:2008 for up to 17 084 kg (37,664 lb)

Safety Criteria Compliance Standards - Seat Belt

SAE J386:JUN1985

Safety Criteria Compliance Standards - Brakes

ISO 3450:2011

Travel Speeds - Runout - Transmission Gear - Reverse

9.2 km/h ( 5.7 mile/h )

Travel Speeds - Runout - Transmission Gear - Sixth

29.6 km/h ( 18.4 mile/h )

Travel Speeds - Runout - Transmission Gear - Eighth

53.9 km/h ( 33.5 mile/h )

Travel Speeds - Runout - Transmission Gear - Third

12.1 km/h ( 7.5 mile/h )

Travel Speeds - Runout - Transmission Gear - Fourth

16.3 km/h ( 10.1 mile/h )

Travel Speeds - Runout - Transmission Gear - Second

8.9 km/h ( 5.5 mile/h )

Travel Speeds - Runout - Transmission Gear - Seventh

39.9 km/h ( 24.8 mile/h )

Travel Speeds - Runout - Transmission Gear - First

5.0 km/h ( 3.1 mile/h )

Travel Speeds - Runout - Transmission Gear - Fifth

21.9 km/h ( 13.6 mile/h )

Implement Cycle Times - Apron Raise

2.95 s ( 2.95 s )

Implement Cycle Times - Bail Lower

3.2 s ( 3.2 s )

Implement Cycle Times - Bowl Lower

3.5 s ( 3.5 s )

Implement Cycle Times - Apron Lower

3.8 s ( 3.8 s )

Implement Cycle Times - Ejector Retract

6.7 s ( 6.7 s )

Implement Cycle Times - Bail Raise

1.8 s ( 1.8 s )

Implement Cycle Times - Ejector Extend

5.2 s ( 5.2 s )

Implement Cycle Times - Bowl Raise

3.0 s ( 3.0 s )

Offering Type

الملحقات

Select Up To 3 Models To Compare