C3.6 China NR4
Cat® C3.6 Diesel Engine
The Cat® C3.6 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. These compact, 4 cylinder engines provide excellent performance in power, peak and low speed torque, fuel comsumption and transient response. This engine is offered in ratings ranging up to 82 kW (110hp) @ 2200 rpm. The C3.6 is designed to meet the needs of many industries and applications, including agricultural tractors, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.
Installation
The Cat C3.6 is a powerful engine in a compact and easily integrated size that saves OEMs valuable time and costs. With flexible aftertreatment mounting options and a simplfied engine installation process, the C3.6 can be placed into a wide variety of applications with agility and speed.
Advanced Features
The C3.6 uses the latest in technology to bring OEMs the most efficient and powerful engine—even at peak performance.
Ideal Applications
Industrial, agricultural and construction applications such as: Pumps • Compressors • Chippers • Grinders • Asphalt paving equipment • Hydraulic power units • Bore rigs • Drill rigs • Tractors • Telehandlers •
Total Cost of Ownership
Owning and operating equipment is a big investment, so it only makes sense to get the most you can from it. Thanks to the chosen technologies of the Cat C3.6, owners can experience an overall savings in fluid.
Cat Dealer Product Support
Backed by a five-year warranty, the Cat C3.6 is also supported by Caterpillar's unmatched Dealer Support Network with over 171 locations in 192 countries across the world—so the expert assistance you need is always close by.
Safety
Safety on the job site matters. The Cat C3.6 a quiet engine output meaning low noise from the engine and a more alert and attentive operator.
Virtual Tours
Documents & Brochures
Standard Equipment
Control System
- Starter motor (12V or 24V)
- Alternator (12V or 24V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
Flywheels and Flywheel Housing
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
Fuel System
- Fuel filter – preconnected but chassis mounted
- With water sensor
Lube System
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
General
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
China Nonroad IV Aftertreatment / Clean Emissions Control Equipment
- Diesel Oxidation Catalyst (DOC)
China Nonroad IV Aftertreatment/ Clean Emissions Control Equipment
- Selective Catalytic Reduction (SCR)
- SCR Auxiliaries
Additional information
| تقدير القدرة - القدرة القصوى | 82 كيلووات ( 110 HP ) |
|---|---|
| تقدير القدرة - أقصى عزم دوران | 450 Nm @ 1500 rpm ( 331.7 lb-ft @ 1500 rpm ) |
| تقدير القدرة - السرعة المقدرة | 2200 دورة في الدقيقة |
| تقدير القدرة - القدرة الدنيا | 74.4 كيلووات ( 100 HP ) |
| معايير الانبعاثات - الانبعاثات | المعايير الصينية لمحركات البيئات الوعرة من المرحلة IV |
| عام - تكوين المحرك | 4 أسطوانات في خط مستقيم |
| عام - التجويف | 98 مم ( 3.9 بوصة ) |
| عام - الشوط | 120 مم ( 4.7 بوصة ) |
| عام - الإزاحة | 3.6 l ( 221 بوصة³ ) |
| عام - نسبة الانضغاط | 17.0:1 |
| عام - السحب | مزوَّد بشاحن توربيني ومزوَّد بمبرد لاحق (TA) |
| عام - نظام الاحتراق | حقن مباشر |
| عام - الدوران من طرف الحدافة | عكس اتجاه حركة عقارب الساعة |
| عام - المعالجة اللاحقة | حفاز أكسدة الديزل (DOC) + فلتر جسيمات الديزل (DPF) أو حفاز أكسدة الديزل (DOC) + فلتر جسيمات الديزل (DPF) + نظام التقليل الحفزي الانتقائي (SCR) |
| أبعاد المحرك - بالتقريب - الطول | 667 مم ( 26.3 بوصة ) |
| أبعاد المحرك - بالتقريب - العرض | 564 مم ( 22.2 بوصة ) |
| أبعاد المحرك - بالتقريب - الارتفاع | 787 مم ( 31 بوصة ) |
| أبعاد المحرك - بالتقريب - الوزن - الصافي الجاف - محرك التشغيل الأساسي من دون الملحقات الاختيارية | 380.6 كجم ( 839 رطل ) |
| أبعاد نظام المعالجة اللاحقة - الوزن | 26.4 كجم ( 58 رطل ) |
| Offering Type |
Related products
-
Industrial Diesel Engines
C1.7
View Details -
Industrial Diesel Engines
C3.6
View Details -
Industrial Diesel Engines
C2.8
View Details -
Industrial Diesel Engines
C9.3B
View Details
