Cat C280-12 Marine Generator Set

Cat C280-12 Marine Generator Set

A3 ECU - Advantages

CAN J1939 data link Waterproof connectors, Maintenance-free, Backup ECU for redundant governing

A3 ECU - Electronic Advantages

Load feedback, Programmable droop, Adjustable gain, Adjustable fuel/air ratio control, Histograms of engine operation, Cat Messenger display presents diagnostics and other engine parameters

A3 ECU - Data Advantages through J1939 Link

Engine speed, Boost pressure, Throttle position, Fuel consumption rate, Inlet manifold temperature, Diagnostic codes and events, Configuration, Desired engine speed, Battery voltage, Engine load, Lifetime totals — engine hours, fuel burned, idle fuel, idle hours, Trip totals — average fuel rate, idle fuel, idle hours, engine hours, fuel burned, trip reset

Customer Interface Panel

Interfaces with standard Cat® Marine Monitoring System (PLC in Price List), Provides visual indication of ECU functionality, Accepts 4 — 20 mA or PWM remote throttle speed input, Marine alarm and protection

Electronic Unit Injectors

“Drop-in” installation, No threaded fuel connections, High pressure inside injector only, Does not require double wall fuel lines or leak collection device, Injector synchronization not required

Standard Equipment

Air Inlet System
  • Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
Control System
  • Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
Cooling System
  • Engine coolant water drains
Exhaust System
  • Dry, gas tight, exhaust manifold
Fuel System
  • Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
Lube Oil System
  • Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the engine running, oil filler and dipstick valve, oil pressure regulating valves, crankcase explosion relief valves
General
  • Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature

Additional Information

مواصفات مجموعة المولدات - أدنى معدل

3520 كيلووات كهربائي (4400 كيلوفولت أمبير)

مواصفات مجموعة المولدات - أقصى معدل

3640 كيلووات كهربائي (4550 كيلوفولت أمبير)

مواصفات مجموعة المولدات - التردد

50 هرتز أو 60 هرتز

مواصفات مجموعة المولدات - السرعة

1000 دورة في الدقيقة (50 هرتز) أو 900 دورة في الدقيقة (60 هرتز)

مواصفات المحرك - السحب

مزوَّد بشاحن توربيني ومزوَّد بمبرد لاحق

مواصفات المحرك - التجويف

280.0 مم ( 11.0 بوصة )

مواصفات المحرك - الشوط

300.0 مم ( 11.8 بوصة )

مواصفات المحرك - الإزاحة

222.0 l ( 13546.0 بوصة³ )

مواصفات المحرك - نوع المنظم

إلكتروني

مواصفات المحرك - نظام الوقود

EUI

مواصفات المحرك - نسبة الانضغاط 50 هرتز

13.1

مواصفات المحرك - نسبة الانضغاط 60 هرتز

13:1

مواصفات المحرك - موديل المحرك

ديزل على شكل حرف V ذو اثنتي عشرة أسطوانة، ذو دورة رباعية الأشواط

مواصفات مجموعة المولدات - الانبعاثات/إستراتيجية الوقود

وكالة حماية البيئة (EPA) من المستوى 2 والمنظمة البحرية الدولية (IMO) من المستوى II

أبعاد مجموعة المولدات - الطول

8040.0 مم ( 316.5 بوصة )

أبعاد مجموعة المولدات - العرض

1961.0 مم ( 77.2 بوصة )

أبعاد مجموعة المولدات - الارتفاع

3937.0 مم ( 155.0 بوصة )

أبعاد مجموعة المولدات - الوزن ـ المُقدر

11340.0 كجم ( 25000.0 رطل )

Offering Type

Select Up To 3 Models To Compare