C18 ACERT Tier 3
Cat C18 ACERT High Performance Propulsion Engine (Tier 3)
The C18 ACERT marine propulsion engine has high performance commercial application ratings of 814-1015 mhp (803-1001 bhp) at 2100-2300 rpm that meet U.S. EPA Tier 3, IMO II, and EU Stage IIIA emissions regulations. In addition to meeting the stricter EPA Tier 3 emissions, this engine now offers a fresh water aftercooled option for the commercial propulsion and auxiliary engines and genset packages. From fishing to offshore and everything in between, you can be confident that we have the solution to fit your needs.
Separate circuit aftercooling system
The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler
Emissions
EPA Tier 3 compliant, IMO II and EU IWW compliant
Cooling system
Heat exchanger and Keel cooled options for all ratings
Turbo Configurations
Single turbo configurations for all ratings
Competitive size and weight
Marine Certifications
All major MCS type approvals available from factory
Virtual Tours
Documents & Brochures
Standard Equipment
AIR INLET SYSTEM
- Separate circuit after-cooled (SCAC)
- Open Crankcase Ventilation (OCV) system
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
COOLING SYSTEM
- Separate Circuit After-Cooling (SCAC) for both HEX and Keel cooled engines
- Engine JW and SCAC Shell & Tube Heat Exchangers for HEX cooled engines
- SCAC pump, gear driven, for HEX cooled engines only
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven
- SCAC and JW shunt tanks for maintaining proper pump inlet pressures
EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 152 mm (6 in) round flanged outlet
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 0
- Flywheel, 18 inch, 136 teeth
- SAE standard rotation
- SAE No. 1, Flywheel: 14 inch, 113 teeth
FUEL SYSTEM
- Front service simplex fuel system
- Fuel transfer pump, gear driven
- Manual fuel priming pump
- Hybrid fuel line design
LUBE SYSTEM
- Front service simplex oil system
- Center sump oil pan:
- Front and top service oil filler locations
- Front service dipstick
- Oil pump, gear driven
POWER TAKE-OFFS
- Poly-V groove for alternator drive
- NOTE: There are no standard power take-offs available
GENERAL
- Front damper guard
- Front service engine
- Common electrical bonding point
- Engine does not ship with zinc components
- Engine is certified to D2/E2 emissions cycles
- CERTIFIED TO 2013 EPA TIER 3 AND IMO II MARINE COMMERCIAL PROPULSION (E3 CYCLE) EMISSION STANDARDS
- CERTIFIED TO EU STAGE IIIA AND CCNR STAGE II (E3 CYCLE) EMISSIONS STANDARDS.
- NOTE: Ratings listed below can also be used in Recreational / Pleasure Craft applications.
CONTROL SYSTEM
- Programmable low idle
- WOSR (Wide Operating Speed Range) available for EPA Tier 3 - B and C Ratings
- Adjustable High Idle (TEL) - EPA Tier 3 WOSR Ratings Only
- Electronic diagnostics and fault logging
- Engine and transmission monitoring (speed, temperature, pressure)
- Electronic fuel/air ratio contro
- Engine Protection Mode for extended ambient conditions - EPA Tier 3 Ratings Only
- Torque Limiting functionality for WOSR ratings only
- 70-pin customer connector
- Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA +/-
Additional information
| Offering Type | |
|---|---|
| Ratings - Power Range | 814-1015 mhp, 803-1001 bhp, 599-747 bkW |
| Engine - Speed Range | 2100-2300 rpm |
| Engine - Emissions | EPA Tier 3, IMO II, EU Stage IIIA |
| Engine - Aspiration | TA,TTA |
| Engine - Bore | 145.0 mm ( 5.7 in ) |
| Engine - Stroke | 183.0 mm ( 7.2 in ) |
| Engine - Displacement | 18.1 l ( 1106.0 in³ ) |
| Engine - Rotation from Flywheel End | Counterclockwise |
| Engine - Configuration | In-line 6, 4-Stroke-Cycle Diesel |
| Dimensions & Weights - Maximum Length | 1931.0 mm ( 76.0 in ) |
| Dimensions & Weights - Minimum Length | 1854.0 mm ( 73.0 in ) |
| Dimensions & Weights - Maximum Dry Weight | 1950.0 kg ( 4299.0 lb ) |
| Dimensions & Weights - Minimum Height | 1198.0 mm ( 47.2 in ) |
| Dimensions & Weights - Maximum Width | 1204.0 mm ( 47.4 in ) |
| Dimensions & Weights - Minimum Dry Weight | 1814.0 kg ( 4000.0 lb ) |
| Dimensions & Weights - Maximum Height | 1300.0 mm ( 51.2 in ) |
| Dimensions & Weights - Minimum Width | 1134.0 mm ( 44.6 in ) |
Related products
-
High Performance Propulsion and Maneuvering Solutions
C32
View Details -
High Performance Propulsion and Maneuvering Solutions
3512C HD
View Details -
High Performance Propulsion and Maneuvering Solutions
C32B
View Details -
High Performance Propulsion and Maneuvering Solutions
C7.1
View Details
