C18 (SRMP) Marine Generator Set

C18 (SRMP) Marine Generator Set

The C18 SRMP is the latest generator and brings commonality with our petroleum products as well as interfacing improvements. We have also taken this opportunity to add new price list options. All engine ratings and emissions certifications are the same, however we have been able to increase the power output of the generator for 12 of the 14 ratings.

Separate circuit aftercooling system

The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler

Emissions

EPA Tier 3 compliant, IMO II and EU IWW compliant

Cooling system

Heat exchanger and Keel cooled options for all ratings

Turbo Configurations

Single turbo configurations for all ratings

Competitive size and weight

Marine Certifications

All major MCS type approvals available from factory

Standard Equipment

Air inlet system
  • Separate circuit after-cooled (SCAC)
  • Heavy-duty inlet air filter
Cooling system
  • SCAC pump, gear driven, for HEX cooled engines only
  • Jacket water pump, gear driven
  • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
Exhaust system
  • Water-cooled exhaust manifold & turbocharger
  • Round flanged exhaust outlet
Fuel system
  • Hybrid fuel lines
  • MEUI™ fuel system
  • Fuel filter, front service
  • Fuel transfer and priming pumps
Lube system
  • Center sump oil pan, deep
  • Front and top service oil filler locations
  • Front service dipstick
Mounting system
  • Vibration Isolators
  • Formed C-channel rails
Control system
  • Electronic fuel/air ratio control
  • SRMP permanent magnet 12-lead generator
  • Digital voltage regulator
  • Class H insulation, Class F temperature rise, IP23 protection

Additional information

Offering Type

Generator Set Specifications - Minimum Rating

260 ekW (325 kVA)

Generator Set Specifications - Maximum Rating

565 ekW (706 kVA)

Generator Set Specifications - Frequency

50 hz

Generator Set Specifications - Speed

50 Hz – 1500 rpm, 60 Hz – 1800 rpm

Engine Specifications - Configuration

In-line 6, 4-Stroke-Cycle Diesel

Engine Specifications - Aspiration

Turbocharged – aftercooled

Engine Specifications - Bore

145.0 mm ( 5.7 in )

Engine Specifications - Stroke

183.0 mm ( 7.2 in )

Engine Specifications - Fuel System

MEUI

Generator Set Configurations - Emissions

EPA Tier 3, IMO II, EU IW

Generator Set Dimensions - Radiator Cooled - Height

2408 mm ( 94.8 in )

Generator Set Dimensions - Radiator Cooled - Length

4741 mm ( 55.6 in )

Generator Set Dimensions - Keel and Hex Cooled - Length

3038.0 mm ( 119.6 in )

Generator Set Dimensions - Keel and Hex Cooled - Height

1648 mm ( 64.9 in )

Generator Specifications - Excitation

SRMP

Generator Specifications - Insulation

Class H

Generator Specifications - IP Rating

IP23 (standard), IP 44 (optional)

Generator Specifications - Voltage Regulator

CDVR (Digital Voltage)

Generator Set Dimensions - Radiator Cooled - Width

1699 mm ( 66.9 in )

Generator Set Dimensions - Keel and Hex Cooled - Width

1411 mm ( 55.6 in )

Generator Set Dimensions - Radiator Cooled - Weight - Approximate

6076 kg ( 13396 lb )

Generator Set Dimensions - Keel and Hex Cooled - Weight - Approximate

4221 kg ( 9747 lb )

Select Up To 3 Models To Compare