C32 ACERT Tier 3
Cat C32 ACERT Generator Set (EPA Tier 3)
C32 ACERT generator sets incorporate a separate circuit aftercooling system (SCAC) for all configurations. The primary advantage of the SCAC systsem is reduced aftercooler corrosion since no sea water circulates through the aftercooler. Many other improvements on these engines contribute to minimizing owning and operating costs. The EPA Tier 3, IMO II, EU Stage IIIA compliant ratings are available with heat exchanger or keel cooled options. Heat exchanger configurations have an optional front mounted sea water pump.
Emissions
U.S. EPA Tier 3 compliant
Worldwide Support
Extensive service network of dealers; Unparalleled service from authorized marine dealers
Durability
Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability
Reliability
60 months standard warranty
Cooling System
Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump
Aftercooling System
Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler
Virtual Tours
Standard Equipment
AIR INLET SYSTEM
- Separate circuit after-cooled (SCAC)
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
CONTROL SYSTEM
- If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer
- Electronic diagnostics and fault logging
- Engine Protection Mode for extended ambient conditions
- Electronic fuel/air ratio control
COOLING SYSTEM
- Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
- Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
- SCAC pump, gear driven
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
- Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard
- 4 Bolt ANSI Flange Connection
- Jacket water HEX without Sea water pump Connection: 2.5" hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)
- Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
- SCAC and JW shunt tanks for maintaining proper Pump inlet pressures
EXHAUST SYSTEM
- Water-cooled exhaust manifold & turbocharger
- 4 Bolt 130 mm (5.12 in) diameter flanged outlet
FLYWHEELS & FLYWHEEL HOUSINGS
- Flywheel Housing, SAE No. 0
- Flywheel, 18 inch, 136 teeth
- SAE standard rotation
FUEL SYSTEM
- Duplex Fuel Filters, Spin-on, RH service
- Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
- Plate-type fuel cooler installed behind Aftercooler Shunt Tank
- Fuel transfer pump, gear driven
- Manual fuel priming pump
GENERATORS AND GENERATOR ATTACHMENTS
- SR5 form wound
- 2 roller bearings
- Permanent magnet excitation
- 4 pole, 6 leads, Series Star connected
- Caterpillar's Digital Voltage Regulator (CDVR)
- Marine Class H insulation, Class F temperature rise
- Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings
- Anti-condensation space heaters (2 elements - 240 VAC, 1000 Watts
- IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)
- System IV insulation for harsh environment protection
LUBE SYSTEM
- Simplex oil filters, RH service
- Deep sump oil pan
- RH service oil filler locations
- RH service dipstick
- Oil pump, gear driven
MOUNTING SYSTEM
- Formed C-channel rails, 300mm (11.81in) height
- Six shipped loose combined helical spring/rubber
- isolators for installation below package base
GENERAL
- Front Damper guard
- Common electrical bondng point on HEX and KEEL cooled engines
Additional information
| مواصفات مجموعة المولدات - أدنى معدل | 730 كيلووات كهربائي (913 كيلوفولت أمبير) |
|---|---|
| مواصفات مجموعة المولدات - أقصى معدل | 940 كيلووات كهربائي (1175 كيلوفولت أمبير) |
| مواصفات مجموعة المولدات - التردد | 60hz |
| مواصفات مجموعة المولدات - السرعة | 1800 دورة في الدقيقة |
| مواصفات المحرك - السحب | مزوَّد بشاحن توربيني وتبريد لاحق |
| مواصفات المحرك - التجويف | 145.0 مم ( 5.7 بوصة ) |
| مواصفات المحرك - الشوط | 162.0 مم ( 6.38 بوصة ) |
| مواصفات المحرك - الإزاحة | 32.1 l ( 1959.0 بوصة³ ) |
| مواصفات المحرك - نوع المنظم | إلكتروني |
| مواصفات المحرك - نظام الوقود | MEUI |
| مواصفات المحرك - موديل المحرك | ديزل على شكل حرف V ذو اثنتي عشرة أسطوانة، ذو دورة رباعية الأشواط |
| مواصفات مجموعة المولدات - الانبعاثات/إستراتيجية الوقود | EPA المستوى III |
| أبعاد مجموعة المولدات - العرض | 1528.0 مم ( 60.2 بوصة ) |
| أبعاد مجموعة المولدات - الارتفاع | 1667.0 مم ( 65.6 بوصة ) |
| أبعاد مجموعة المولدات - الوزن ـ المُقدر | 7131.0 كجم ( 15721.0 رطل ) |
| أبعاد مجموعة المولدات - الطول | 162,8 بوصة/4271 مم (الحد الأدنى)، 175,3 بوصة/4452 مم (الحد الأقصى) |
| مواصفات المولد - الاستثارة | مغناطيس دائم |
| مواصفات المولد - عدد الأقطاب | 4 |
| مواصفات المولد - عدد المحامل | محملا بكرات |
| مواصفات المولد - عدد الأسلاك | 6 |
| مواصفات المولد - العزل | الفئة H |
| مواصفات المولد - تقدير IP | 23 |
| مواصفات المولد - منظم الجهد | CDVR |
| Offering Type |
Related products
-
Marine Generator Sets
C2.2
View Details -
Marine Generator Sets
C280-8
View Details -
Marine Generator Sets
C32 Tier 3 / IMO II
View Details -
Marine Generator Sets
C4.4
View Details
