C9 | DE330E0
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
A-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Generator Features
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
The generator set meets transient response and block loading steps as per ISO 8528-5.
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Documents & Brochures
Standard Equipment
Air Inlet System
- Air cleaner, light duty with disposable paper filter
Control Panels
- GCCP 1.3
Cooling System
- Coolant drain line with valve
- Radiator and cooling fan with guard
- Fan drive, battery charging alternator drive
- Caterpillar extended life coolant
Exhaust System
- Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose
Fuel System
- Base, formed steel with single wall integral 8-hour fuel tank
- Standard open set fuel tank/base supplied
Generators and Generator Attachments
- Power centre, IP22
- Voltage regulator (single phase sensing)
- Segregated low voltage (AC/DC) wiring panel
- IP23 Protection
- 12 Leads
- Mandatory option circuit breaker, IEC, 3 pole mounted in power centre
Governing System
- Cat electronic governor (ADEM A4)
Lube System
- Oil cooler
- Oil drain valves
- Lubricating oil
Mounting System
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines
Starting / Charging System
- 24V battery with rack and cables
General
- Engine and alternator re-paint, Caterpillar yellow
Additional information
Offering Type | |
---|---|
Generator Set Specifications - Maximum Rating | 330 kVA |
Generator Set Specifications - Minimum Rating | 330 kVA |
Generator Set Specifications - Emissions/Fuel Strategy | Non-Certified |
Generator Set Specifications - Voltage | 200 to 400 Volts |
Generator Set Specifications - Frequency | 50 Hz |
Generator Set Specifications - Speed | 1500 rpm |
Generator Set Specifications - Duty Cycle | Standby, Prime |
Engine Specifications - Engine Model | C9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
Engine Specifications - Bore | 112 mm ( 4.41 in ) |
Engine Specifications - Stroke | 149 mm ( 5.87 in ) |
Engine Specifications - Displacement | 8.8 l ( 537.01 in³ ) |
Engine Specifications - Compression Ratio | 16.1:1 |
Engine Specifications - Aspiration | Air to Air Aftercooled |
Engine Specifications - Fuel System | Hydraulic electronic unit injection |
Engine Specifications - Governor Type | Adem™A4 |
Generator Set Dimensions - Length - Maximum | 3988 mm ( 157 in ) |
Generator Set Dimensions - Width - Maximum | 1207 mm ( 47.5 in ) |
Generator Set Dimensions - Height - Maximum | 1867 mm ( 73.5 in ) |