D200 GC Generator Set

Producing reliable power of 200 ekW at 60 Hz, our D200 GC diesel generator set is designed to meet ISO 8528-5 transient response requirements.

Cat Generator Set Package

  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

M-Frame Alternator

  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

GCCP 1.2 Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

Cooling System

  • Designed to operate in standard ambient temperatures up to 55°C (131°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

  • UL 2200 Listed
  • ULC Certification Available

One Safe Source

  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

Worldwide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment

Air Inlet System
  • Air cleaner; light duty with disposable element
Control Panels
  • GCCP 1.2 Control panel
Cooling System
  • Coolant drain line with valves
  • Radiator and cooling fan with guards
  • Caterpillar extended life coolant
  • Fan drive, battery charging alternator drive
Generator and Generator Attachments
  • Segregated low voltage (AC/DC) wiring panel
  • Voltage regulator (single phase sensing)
  • Circuit breaker, IEC, 3 pole, mounted in tower panel
  • Tower panel, IP22, bottom cable entry
  • 12 Leads
  • IP23 Protection
Exhaust System
  • Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Fuel System
  • Standard open set fuel tank/base supplied
  • Base, formed steel with single wall integral 24-hour fuel tank
Lube System
  • Oil drain line with valve
  • Lubricating oil
Mounting System
  • Captive linear vibration isolators between base and engine-generator
  • Includes lifting provision and drag points
  • Termination points for coolant and lube oil drain lines
Starting / Charging System
  • 24V battery with rack and cables
Governing System
  • Mechanical and electrical governing system - model dependent
General
  • Engine and alternator pre-paint, Caterpillar yellow

Additional information

Offering Type

Generator Set Specifications - Maximum Rating

200 ekW

Generator Set Specifications - Minimum Rating

200 ekW

Generator Set Specifications - Emissions/Fuel Strategy

U.S. EPA Cert., Tier 3

Generator Set Specifications - Voltage

208 to 600 Volts

Generator Set Specifications - Frequency

60 Hz

Generator Set Specifications - Speed

1800 rpm

Generator Set Specifications - Duty Cycle

Standby

Engine Specifications - Engine Model

C7.1 I-6, 4-Cycle Diesel

Engine Specifications - Bore

105 mm ( 4.1 in )

Engine Specifications - Stroke

135 mm ( 5.31 in )

Engine Specifications - Displacement

7.01 l ( 428 in³ )

Engine Specifications - Compression Ratio

16.7:1

Engine Specifications - Aspiration

Turbocharged, Air to Air Aftercooled

Engine Specifications - Fuel System

Electronic, Common Rail

Engine Specifications - Governor Type

ADEM™A4

Generator Set Dimensions - Length - Maximum

2634 mm ( 103.7 in )

Generator Set Dimensions - Width - Maximum

1300 mm ( 51.2 in )

Generator Set Dimensions - Height - Maximum

1492 mm ( 58.7 in )

Generator Set Dimensions - Dry Weight - Genset (maximum)

1777 kg ( 3917 lb )

Select Up To 3 Models To Compare