TRS8
Complete 360 Degree Rotation
Provides optimal control of your work tools to provide greater flexibility.
Integrated Central Lubrication System
A single point of entry for grease allows the entire unit to be greased quickly and easily.
TRS8 Positioning System
Upgraded software informs the operator of the attachments position via standard equipped monitoring sensors.
Oil Filled Gearbox
A maintenance free solution that more effectively distributes heat, providing better lubrication than grease.
Heavy Duty Worm Gear
Worm gear box with high rotation torque and self locking ability allows digging in all directions with full power, allowing the gear to accept the maximum machine forces and split the load through the entire TRS construction.
Double Acting Cylinders with Load Hold Valves
Valves sustain holding pressures and prevent cylinders movement under load constraints required by directives.
Visual Verification Indicator
The visual verification indicator allows the operator to visibly confirm, from the cab, that the coupler has successfully locked the attachment into place properly.
Optional Grapple Attachment
Used to pick up objects such as pipe and debris.
Locking Control System (LCS)
LCS incorporates an electronic position sensor integrated into the quick coupler hydraulic cylinder. This sensor provides precise and reliable input to an electronic processor mounted inside the quick coupler. This microprocessor provides digital communication to the Next Generation MHE machine Electronic Control Module (ECM) by way of an electrical harness. This data is then displayed on the operators display screen, and will provide audible indications when that locking status changes.
LED Light
Used for visibility when engaging and disengaging a tool underneath the TRS8.
Compatibility Note
Only compatible with the following Next Gen machines and serial numbers:
- 307.5 - S/N GW7 1 & Up
- 308 - S/N GG8 1 & Up
- 308 - S/N GW8 1 & Up
- 309 - S/N GG9 1 & Up
- 309 - S/N GW9 1 & Up
Virtual Tours
Documents & Brochures
Additional information
Offering Type | |
---|---|
Machine Class | 7-9 Ton Mini Excavator |
Weight | 322.9 kg ( 711.9 lb ) |
Interface Options: Top-Bottom | Pin On / S-45 |
Overall Height | 957 mm ( 37.7 in ) |
Length | 660 mm ( 26 in ) |
Overall Width | 678 mm ( 26.7 in ) |
Rotation Speed | 7 Seconds per 1 full rotation |
Tilt Angle Range +/- | 40° Left/Right |
Maximum Bucket Capacity | 500 l ( 17.7 ft³ ) |
Maximum Bucket Width | 1500 mm ( 59.1 in ) |
Optimal Hydraulic Flow | 45-75 L/min (12-20 gpm) |
Maximum Operating Pressure | 25000 kPa ( 3625.9 psi ) |
Required Hydraulics | 1st Auxiliary |
Tilting Torque | 26500 N·m ( 19545.4 lb/ft ) |
Turning Torque | 3900 N·m ( 2876.5 lb/ft ) |