C3.3 (50 Hz)

C3.3 Generator Set

Producing reliable power from 24.0 to 65.0 kVA at 50 Hz, our C3.3 diesel generator sets designed to ISO 8528-5 transient response requirements. All C3.3 generator sets are R96/EUIIIa equivalent emissions compliant.

Cat Generator Set Package

  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

M-Frame Alternator

  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

GCCP 1.3 Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
  • Image may not be a representative of actual product

Cooling System

  • Designed to operate in standard ambient temperatures up to 55°C (131°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S•O•S℠ program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products

One Safe Source

  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Standard Equipment

Air Inlet System
  • Air cleaner; light duty with disposable element
Control Panel
  • GCCP 1.3
Cooling System
  • Coolant drain line with valve
  • Radiator and cooling fan with guards
  • Caterpillar extended life coolant
  • Fan drive, battery charging alternator drive
Exhaust System
  • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
Fuel System
  • Standard open set fuel tank/base supplied
  • Base, formed steel with single wall integral 8-hour fuel tank
Generators and Generator Attachments
  • Voltage regulator (single phase sensing)
  • Tower panel, IP22, bottom cable entry
  • Circuit breaker, IEC, 3 pole, mounted in tower panel
  • IP23 Protection
  • Segregated low voltage (AC/DC) wiring panel
Governing System
  • Mechanical and electrical governing system - model dependant
Generators and attachments
  • 12 Leads
Lube System
  • Lubricating oil
  • Oil drain line with valve
Mounting System
  • Captive linear vibration isolators between base and engine-generator
  • Termination points for coolant and lube oil drain lines
  • Includes lifting provision and drag points
Starting / Charging System
  • 12V Battery with rack & cables
General
  • Engine and alternator pre-paint, Caterpillar yellow

Additional information

Offering Type

Generator Set Specifications - Maximum Rating

65.0 kVA

Generator Set Specifications - Minimum Rating

24.0 kVA

Generator Set Specifications - Emissions/Fuel Strategy

EU Stage II R96/EUIIIa

Generator Set Specifications - Voltage

110 to 480 Volts

Generator Set Specifications - Frequency

50 Hz

Generator Set Specifications - Speed

1500 rpm

Generator Set Specifications - Duty Cycle

Standby, Prime

Engine Specifications - Engine Model

Cat® C3.3

Engine Specifications - Bore

105 mm ( 4.1 in )

Engine Specifications - Stroke

127 mm ( 5 in )

Engine Specifications - Displacement

3.3 l ( 201.4 in³ )

Engine Specifications - Compression Ratio

17.25:1, 19.25:1

Engine Specifications - Aspiration

Turbocharged

Engine Specifications - Fuel System

Direct Injection

Engine Specifications - Governor Type

Mechanical

Generator Set Dimensions - Length - Maximum

1115 mm ( 43.9 in )

Generator Set Dimensions - Width - Maximum

970 mm ( 38.2 in )

Generator Set Dimensions - Height - Maximum

1361 mm ( 53.6 in )

  • Enclosures

    30-220 kVA SA Lvl 1 Enclosure

    View Details
Select Up To 3 Models To Compare