C32 ACERT Tier 2

C32 ACERT Tier 2 Oilfield Diesel Generator Set

Producing oil and gas is a complex task that requires equipped designed specifically for the oilfield. Cat C-Series oilfield diesel generator sets offer a rugged design capable of withstanding harsh conditions in the oilfield. Decades of experience in engine manufacturing combined with the latest electronics deliver the highest performance, safe operation, low emissions, and simplified operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C32 ACERT oilfield diesel generator set. Ratings: 800 – 910 ekW (1000 – 1300 kVA) @ 50 and 60 Hz (1500 and 1800 rpm) meet U.S. EPA Tier 2 equivalent, EU Stage II equivalent emission standards.

Product Support Offered Through the Global Cat Dealer Network

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure opti

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

Standard Equipment

Air Inlet System
  • Dual element air cleaner
  • Service indicator
Cooling System
  • Radiator package mounted (50° C)
  • Coolant drain line with valve at edge of base
  • Coolant level sensor
  • Fan and belt guards
  • Coolant level sight gauge
  • Cat Extended Life Coolant
  • Metal top and bottom tanks
Exhaust System
  • Dry exhaust manifold
  • Flange outlets
Fuel System
  • Primary fuel filter with integral water separator
  • Secondary fuel filters
  • Fuel priming pump
  • Flex fuel lines
  • Fuel cooler
Generator
  • SR4B brushless
  • Self excited
  • Class H insulation
  • Form wound
  • IP23 protection
  • Cat DVR 3-phase sensing with selectable volts/Hz
  • 3 sensing CTs and one droop CT
  • Anti-condensation space heater
Generator Attachments
  • Bus bar - NEMA and IEC mechanicallug holes
  • Bottom cable entry; capable of top cable entry
Controls
  • ADEM A4 ECU
  • EMCP 3 Control Panel
Lube System
  • High efficiency oil filter
  • Oil drain valves
  • Fumes disposal
  • Gear-type lube oil pump
  • Deep sump oil pan
Mounting System
  • Steel base frame (skidable)
  • Anti-vibration mounts (shipped loose)
  • Designed welded base for increased durability (I-beam design)
Starting/Charging System
  • 24-volt starting motor
  • 45-amp charging alternator
  • Battery rack
  • Battery disconnect switch
  • Oversized batteries
General
  • Paint — Caterpillar yellow except rails and radiators (gloss black)
  • Flywheel and flywheel housing — SAE No. 0

Additional information

Offering Type

Engine Specifications - Maximum Rating

800 ekW (1000 kVA)

Engine Specifications - Minimum Rating

910 ekW (1300 kVA)

Engine Specifications - Emissions/Fuel Strategy

U.S. EPA Tier 2

Engine Specifications - Aspiration

Turbocharged-Aftercooled

Engine Specifications - Manifold Type

Dry

Engine Specifications - Bore

145.0 mm ( 5.7 in )

Engine Specifications - Stroke

162.0 mm ( 6.4 in )

Engine Specifications - Displacement

32.1 l ( 1959.0 in³ )

Engine Specifications - Engine Control and Protection

ADEM A4

Engine Specifications - Generator Set Control

EMCP 3.1

Engine Specifications - Generator

SR4B

Engine Specifications - Fuel System

MEUI

Engine Specifications - Frequency - Speed

50/60 Hz (1500/1800 rpm)

Capacity for Liquids - Fuel

Diesel

Dimensions - Length

5228.0 mm ( 206.0 in )

Dimensions - Width

1905.0 mm ( 75.0 in )

Dimensions - Height

2180.0 mm ( 86.0 in )

Dimensions - Weight

9299.0 kg ( 20500.0 lb )

Select Up To 3 Models To Compare