C32 ACERT™
C32 ACERT Land Mechanical Drilling Engine
Cat C32 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C32 ACERT engines to deliver excellent performance with low operating costs and emissions.This is an ideal engine for land mechanical drilling applications such as mud pump drives.Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat C32 ACERT Diesel Engine. Ratings: 597-1119 bkW (800-1500 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.
Engine Design
- Proven reliability and durability- Robust diesel strength design prolongs life and lowersowning and operating costs- Broad operating speed range- High power density — lightweight engine for weightsensitive applications- PTO drive options provide flexible access to auxiliarypower for pumps and other needs
Advanced Digital Engine Management
ADEM A4 engine management system integrates speedcontrol, air/fuel ratio control and ignition/detonationcontrols into a complete engine management systemwith integrated digital ignition, engine protection andmonitoring.
Transmissions
Caterpillar has a full line of engine-transmission packagesthat can be fully integrated with your axle, hydraulics, andoperator interface. Cat®transmissions deliver continuousoperation under full load, smooth shifting at any speed,and maximum up time, with unmatched durability andeasy maintenance
Custom Packaging
For any petroleum application, trust Caterpillar to meetyour exact needs with a factory custom package. Catengines, generators, enclosures, controls, radiators,transmissions — anything your project requires — can becustom designed and matched to create a one-of-a kindsolution. Custom packages are globally supported andare covered by a one-year warranty after startup.
Full Range of Attachments
Large variety of factory-installed engine attachmentsreduces packaging time
Testing
Every engine is full-load tested to ensure proper engineperformance.
Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outletsCat factory-trained dealer technicians service everyaspect of your petroleum engineCat parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSMprogram matches your oil and coolant samplesagainst Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enablesCaterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheelhousings- Machine critical components- Assemble complete engine
Web Site
For all your petroleum power requirements, visit www.catoilandgasinfo.com
Documents & Brochures
Standard Equipment
Air Inlet System
- Quad turbocharger — 3 cylinder exhaust to each turbo
- Connections configured for ATAAC (Air-to-Air-Aftercooled)or remote heat exchanger
Control System
- ADEM A4 electronic control module
- Electronic governing, PTO speed control
- Customer programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Automatic fuel temperature compensation
- Programmable low and high idle, and top engine speedlimit
- Electronic diagnostics and fault logging
- Engine monitoring system
- SAE J1939 broadcast (diagnostic and engine status)
Cooling System
- Gear-driven centrifugal jacket water pump — RH
- Integrated thermostat and housing
- Engine oil cooler
- Optional installed transmission oil cooler
Exhaust System
- Exhaust manifold — dry
- Two vertical exhaust outlets (front and rear)
Fuel System
- MEUI
- Fuel priming pump
- Fuel transfer pump
- Primary and secondary fuel filter — RH configured forremote mounting (installed RH on shipping plate)
Flywheels and Flywheel Housing
- SAE No. 0 or SAE No. 1 flywheel iron housing
- SAE No. 0 or SAE No. 1 flywheel
- Optional transmission adapter
Lube System
- Crankcase breather
- Oil filter — RH standard, optional LH or remote mountservice
- Oil level gauge — RH standard, optional LH or dualservice
- Oil filler — RH standard, optional LH or dual service
- Shallow oil pan, rear sump
Mounting System
- Trunnion front support
- Vertical and horizontal pads on rear flywheel housing
Protection System
- 24V electronic
- Engine overspeed with optional air shut-offs withindicators
- Low engine oil pressure
- Fuel filter restriction
- Fuel temperature
- High engine coolant temperature
- Low engine coolant temperature
General
- Vibration damper and optional guard
- Lifting eyes
- Optional customer wiring connector
- Service tool connector
- Paint — Cat yellow
Additional information
مواصفات المحرك - الحد الأقصى للتقدير | 1119.0 bkW ( 1500.0 BHP ) |
---|---|
مواصفات المحرك - الانبعاثات | المعايير الخاصة للطرق الوعرة من المستوى 2 |
مواصفات المحرك - الإزاحة | 32.0 l ( 1953.0 بوصة³ ) |
مواصفات المحرك - أدنى تقدير | 597.0 bkW ( 800.0 BHP ) |
مواصفات المحرك - التجويف | 145.0 مم ( 5.7 بوصة ) |
مواصفات المحرك - الشوط | 162.0 مم ( 6.4 بوصة ) |
مواصفات المحرك - السرعة المقدرة | 1800.0 دورة في الدقيقة ( 2100.0 دورة في الدقيقة ) |
مواصفات المحرك - السحب | يعمل بشاحن توربيني-مبرد لاحقًا |
مواصفات المحرك - المنظم والحماية | ADEM A3 |
مواصفات المحرك - وزن المحرك، الصافي الجاف | 2286.0 كجم ( 5040.0 رطل ) |
مواصفات المحرك - الدوران من طرف الحدافة | عكس عقارب الساعة |
مواصفات المحرك - الفاصل الزمني لتغيير الزيت | 250 |
مواصفات المحرك - الحدافة ومبيت الحدافة | معيار SAE رقم 0 أو SAE رقم 1 |
مواصفات المحرك - أسنان الحدافة | 136 (SAE 0)، 113 (SAE 1) |
سعة السوائل - الحد الأدنى لنظام التبريد (المحرك فقط) | 55.0 l ( 14.5 جالون (أمريكي) ) |
Dimensions - الطول | 1918.0 مم ( 75.5 بوصة ) |
Dimensions - العرض | 1473.0 مم ( 85.0 بوصة ) |
الأبعاد - الارتفاع | 1321.0 مم ( 52.0 بوصة ) |
Offering Type |