C32 IMO III
Cat C32 Generator Set (IMO III)
Cat C32 Generator Set, IMO III emissions certified (SCR required)
Emissions
Utilizes SCR Technology to enable IMO III emission regulations compliance while lowering operational costs
Control Strategy
Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs; Extends emissions useful life; Ensures compliance; Flexible to urea quality
Fuel System
Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology
Power Reserve
Industry leading power reserve
Certifications
Wide range of available Marine Society certifications
Warranty
Industry-leading warranty coverage for factory packaged components
Service
Global dealer network for service in any location
Documents & Brochures
Standard Equipment
AIR INLET SYSTEM
- Separate circuit aftercooled (SCAC)
- Closed crankcase fumes disposal
CONTROL SYSTEM
- 24V control system
COOLING SYSTEM
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
FUEL SYSTEM
- Primary fuel filter with water separator installed on base frame
- Duplex fuel filters with hybrid fuel lines
GENERATORS AND GENERATOR ATTACHMENTS
- IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
LUBE SYSTEM
- Oil fill, simplex filter and dipstick
MOUNTING SYSTEM
- Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
GENERAL
- Right or left hand service sides
- Customer wiring and service tool connector
Additional information
| Offering Type | |
|---|---|
| Generator Set Specifications - Minimum Rating | 219 ekW |
| Generator Set Specifications - Maximum Rating | 940 ekW |
| Generator Set Specifications - Frequency | 60hz |
| Engine Specifications - Rated Engine Speed | 1500 rpm |
| Engine Specifications - Configuration | Vee-12, 4-stroke-Cycle-Diesel |
| Engine Specifications - Aspiration | Turbocharged-aftercooled aspiration |
| Engine Specifications - Bore | 145.0 mm ( 5.71 in ) |
| Engine Specifications - Stroke | 162.0 mm ( 6.38 in ) |
| Engine Specifications - Displacement | 32.1 l ( 1959.0 in³ ) |
| Engine Specifications - Governor | Electronic (A5 ECM) |
| Engine Specifications - Emissions | IMO III emissions certified (SCR required) |
| Generator Set Dimensions - Length | 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum) |
| Generator Set Dimensions - Width | 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum) |
| Generator Set Dimensions - Height | 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum) |
| Generator Set Dimensions - Package Dry Weight | 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum) |
| Engine Specifications - Refill Capacity | Lube Oil System w/ oil filter change: 146 L (38.5 gal) |
| Engine Specifications - Oil Change Interval | 750 hrs |
| Engine Specifications - Cooling | Heat exchanger, keel or radiator cooled |
| Engine Specifications - Generator | SR5 – Form Wound |
Related products
-
Marine Generator Sets
C4.4
View Details -
Marine Generator Sets
C2.2
View Details -
Marine Generator Sets
C280-8
View Details -
Marine Generator Sets
C32 ACERT Tier 3
View Details
