D300 GC
Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.2 Control Panel
- User-friendly interface and navigation
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to104°F (40°C)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
- UL 2200 Listed
- ULC Certification Available
One Safe Source
- Components used in the generator set are selected based on seamless design integration to provide the optimum performance
- The generator set is fully assembled at a Caterpillar facility following our quality guidelines
- Each generator set package is tested before leaving the Caterpillar facility
- Cat product support, including dealer service, parts and warranty covers the entire Cat power system
Worldwide Product Support
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries
- Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Documents & Brochures
Standard Equipment
Air Inlet System
- Aftercooler core
- Turbocharger
- Air cleaner - Non canister, disposable
Control Panel
- GCCP 1.2
Cooling System
- Jacket water pump, gear driven, centrifugal
- Thermostats and housing
- Coolant drain valve
- Radiator sight gauge
- Blower fan and fan drive with guards
- Radiator, package mounted
Exhaust System
- Exhaust manifold - dry
Fuel System
- Integral tank base, 24 hours, UL142
- Fuel priming pump
- Engine fuel transfer pump
- Primary fuel filter w/integral water separator and secondary filter, spin on
Generator Set
- Complete system designed & built at ISO 9001:2000 certified facilities
- All protective devices and control functions simulated and checked
- Factory tested to design specifications at full load conditions
Generators and Generator Attachments
- IP23 Protection
- 12 Leads
- Insulation system, Class H
- Standard winding protection for non-harsh environments with relative humidity ? 95%
- Voltage regulator (single phase sensing)
- Easy access to AVR and terminals
- Terminal box, IP22 RHS facing, bottom cable entry
- Brushless, self-excited 2/3 pitch (600V uses Internal excitation (IE))
Governing System
- Cat electronic governor (ADEM A4)
Lube System
- Shallow oil pan
- Oil cooler
- Fumes disposal to front of radiator
- Oil drain with valve
- Oil filler and dipstick
- Oil filter, spin on
- Lubricating oil, CK-4 (10W-30)
Mounting System
- Captive linear vibration isolators between base and engine-generator
- Includes lifting provisions and termination points for coolant and lube oil drain lines
Protection
- Safety shutoff - High water temperature
- Safety shutoff - Low oil pressure
- Safety shutoff - Overspeed
Starting/Charging System
- 24-volt electric starting motor
- 24V, 45 Amp Charging alternator
General
- Lifting eyes
- Vibration damper
- Parts book
Additional information
Offering Type | |
---|---|
Generator Set Specifications - Maximum Rating | 300 ekW |
Generator Set Specifications - Minimum Rating | 300 ekW |
Generator Set Specifications - Emissions/Fuel Strategy | EPA Stationary Emergency |
Generator Set Specifications - Voltage | 208 to 600 Volts |
Generator Set Specifications - Frequency | 60 Hz |
Generator Set Specifications - Speed | 1800 rpm |
Generator Set Specifications - Duty Cycle | Standby |
Engine Specifications - Engine Model | Cat® C9 In-line 6, 4-cycle diesel |
Engine Specifications - Bore | 112 mm ( 4.4 in ) |
Engine Specifications - Stroke | 149 mm ( 5.9 in ) |
Engine Specifications - Displacement | 8.8 l ( 538 in³ ) |
Engine Specifications - Compression Ratio | 16.3:1 |
Engine Specifications - Aspiration | Turbocharged Air-to-Air Aftercooled |
Engine Specifications - Fuel System | HEUI |
Engine Specifications - Governor Type | Adem™A4 |
Generator Set Dimensions - Length - Maximum | 3950 mm ( 155.5 in ) |
Generator Set Dimensions - Width - Minimum | 1430 mm ( 56.3 in ) |
Generator Set Dimensions - Width - Maximum | 1440 mm ( 56.7 in ) |
Generator Set Dimensions - Height - Minimum | 1706 mm ( 67.2 in ) |
Generator Set Dimensions - Height - Maximum | 2202 mm ( 86.7 in ) |
Generator Set Dimensions - Dry Weight - Genset (minimum) | 2503 kg ( 5518.2 lb ) |
Generator Set Dimensions - Dry Weight - Genset (maximum) | 3143 kg ( 6929.1 lb ) |