DG200 GC (3 phase)

DG200-2 (3 phase)

The Cat® spark-ignited generator product line for stationary applications feature permanent magnet excitation, amortisseur winding, skewed stator, voltage adjustment through the EMCP controller, Class H winding insulation and 2/3 pitch incorporated.

Category:
Add to Quote

Engine

  • Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight

Generator

  • Matched to the performance and output characteristics of Cat engines
  • Industry leading mechanical and electrical design
  • Industry leading motor starting capabilities
  • High Efficiency

EMCP Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

Design Criteria

  • The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
  • Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water

UL 2200 / CSA - Optional

  • UL 2200 Listed packages
  • CSA Certified
  • Certain restrictions may apply
  • Consult with your Cat® Dealer

Worldwide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Documents & Brochures

Standard Equipment

Cooling
  • Closed coolant recovery system
  • Factory-installed radiator
  • 50/50 Ethylene glycol antifreeze
  • Radiator and cooling fan complete with protective guards
  • Standard ambient temperatures up to 50°C (122°F)
Air Inlet
  • Single element air filter
Fuel
  • Primary and secondary fuel shut-off
  • Low fuel pressure switch
  • Fuel pressure test po
  • Natural Gas or LP Vapor
  • NPT connection
  • Dual lock off valves
Exhaust
  • Exhaust outlet with 3” pipe
Generator
  • Permanent magnet excitation
  • Full load capacity alternator
  • Class H insulation material
  • Permanent magnet excitation
  • Integrated Voltage Regulator
  • Matched to the performance and output characteristics of Cat engines
  • Class H insulation material
  • Full load capacity alternator
  • IP23 Protection
Controls
  • EMCP 4.2 Series generator set controller
Mounting
  • Vibration isolaton (puck type)
  • Rubber vibration isolators
Electric Power - Package Serial Number Prefix
  • Battery charging alternator
Electric Starting and/or Prelube
  • Battery cables
  • Solenoid activated starter motor
  • Engine electrical system
  • Solenoid activated starter motor
Governor
  • Electronic governor (non adjustable)
Control Panel
  • EMCP 4.2 Series generator set controller
Starting/Charging
  • Batteries with rack and cables
  • 12 volt starting motor

Additional information

Offering Type

Generator Set Specifications - Frequency

60 Hz
Generator Set Specifications - Natural Gas Rating

200 eKW
Generator Set Specifications - Emissions/Fuel Strategy

U.S. EPA Certified for Non-Emergency Application
Engine Specifications - Engine Model

14.2 L, Inline 6, 4 Cycle, Spark – Ignited
Generator Set Specifications - Displacement

14.17 l ( 864.71 in )
Engine Specifications - Fuel System

Carburetor, Down Draft
Generator Set Specifications - Fuel Type

Natural Gas
Generator Set Specifications - Speed

1800 rpm
Engine Specifications - Aspiration

Turbocharged-Aftercooled
Engine Specifications - Governor Type

Electronic
Engine Specifications - Compression Ratio

9.5:1
Engine Specifications - Bore

134.87 mm ( 5.31 in )
Engine Specifications - Stroke

165.1 mm ( 6.5 in )
Generator Set Dimensions - Length

3250 mm ( 127.95 in )
Generator Set Dimensions - Width

1344.5 mm ( 52.93 in )
Generator Set Dimensions - Height

1711.2 mm ( 67.37 in )
Generator Set Dimensions - Weight

2610.9 kg ( 5756 lb )

Related products

  • Equipment
  • Power Systems
  • Attachments
  • Material Handling
Select Up To 3 Models To Compare
Compare