C18 (60 Hz)
C18 Generator Set
The C18 diesel generator sets developed for mission critical, standby and prime applications. Producing reliable power from 455 to 600 ekW at 60 Hz, meeting ISO 8528-5 transient response requirements and built to accept 100 % rated load in one step. Our C18 generator sets range from low fuel consumption systems to EPA Stationary Emergency (Tier 2) certified Emissions / Fuel Strategy.
Cat Generator Set Package
Cat Diesel Engine
SR5 Alternator
EMCP Control Panel
Cooling System
Certifications
One Safe Source
Worldwide Product Support
Documents & Brochures
- Electric Power Ratings Guide
- C18, DE650SE0, 60 Hz, 650 ekW Standby, 600 ekW Prime, Low BSFC Spec Sheet
- C18, DE715SE0, 60 Hz, 716 ekW Standby, 650 ekW Prime, Low BSFC Spec Sheet
- C18, DE750SE0, 60 Hz, 750 ekW Standby, 680 ekW Prime, Low BSFC Spec Sheet
- C18, DE550SE0, 60 Hz, 550 ekW Standby, 500 ekW Prime, Non-Certified Emissions Spec Sheet
- C18 for industrial applications
Standard Equipment
Air Inlet
- Air cleaner
Air Inlet System
- Light duty air cleaner
- Turbocharger
- Aftercooler core
Governing System
- Cat electronic governor (ADEM A4)
Control System
- GCCP 1.2
Cooling
- Radiator and cooling fan with guard
- Fan drive, battery charging alternator drive
- Coolant drain line with valve
- Caterpillar extended life coolant
- Package mounted radiator
Exhaust
- Exhaust flange outlet
Exhaust System
- Stainless steel exhaust flex gaskets, raincap and SAE exhaust
flange for customer use - shipped loose
Fuel
- Fuel priming pump
- Secondary fuel filters
- Primary fuel filter with integral water separator
Fuel System
- Standard 8 hour open set fuel tank
Generator and Attachments
- Matched to the performance and output characteristics of Cat engines
- Integrated voltage regulator (IVR)
- Segregated low voltage (AC/DC) wiring panel
- A Frame generator - IP21 protection
- Integrated voltage regulator (IVR)
- Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
- Power center, IP22
Generator
- IP23 Protection
- Matched to the performance and output characteristics of Cat engines
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
- Busbar
Control Panel
- GCCP Genset Controller
Lube System
- Lubricating oil
- Oil drain valves
Mounting
- Rubber vibration isolators
Mounting System
- Captive linear vibration isolators between base and engine-generator.
includes lifting provisions and termination points for coolant
and lube oil drain lines
Starting/Charging
- 24 Volt battery with rack and cables
- 24 volt starting motor
- Batteries
General
- Engine and alternator pre-paint, Caterpillar yellow
- Paint - Caterpillar yellow except rails and radiators gloss black
Additional information
Offering Type | |
---|---|
Generator Set Specifications - Maximum Rating | 600 ekW |
Generator Set Specifications - Minimum Rating | 455 ekW |
Generator Set Specifications - Emissions/Fuel Strategy | Low Fuel Consumption |
Generator Set Specifications - Voltage | 208 to 600 Volts |
Generator Set Specifications - Frequency | 60 Hz |
Generator Set Specifications - Speed | 1800 rpm |
Generator Set Specifications - Duty Cycle | Standby, Prime |
Engine Specifications - Engine Model | C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel |
Engine Specifications - Bore | 145 mm ( 5.71 in ) |
Engine Specifications - Stroke | 183 mm ( 7.2 in ) |
Engine Specifications - Displacement | 18.1 l ( 1106.4 in³ ) |
Engine Specifications - Compression Ratio | 14.5:1 |
Engine Specifications - Aspiration | Air to Air Aftercooled |
Engine Specifications - Fuel System | Electronic unit injection |
Engine Specifications - Governor Type | Adem™A4 |
Generator Set Dimensions - Length - Maximum | 5550 mm ( 218.5 in ) |
Generator Set Dimensions - Width - Maximum | 2056 mm ( 80.9 in ) |
Generator Set Dimensions - Height - Maximum | 2737 mm ( 107.8 in ) |
-
Enclosures
C13, C15, C18 SA enclosure. 350-600 kW 60 Hz
View Details -
Enclosures
C18 High Ambient Acoustic Enclosure
View Details -
Enclosures
C18 Sound Attenuated Enclosure 50 and 60 Hz
View Details -
Control Panels
EMCP 4.2B Control Panel
View Details -
Control Panels
EMCP 4.4 Control Panel
View Details